Here are my instructions for you to make your Disney Style Sizzix Buzz Lightyear mini kit available to purchase in my shop. Or if you want to have a go at making your own if you have the sizzix dies.
This is what you will receive in your mini kit to make Buzz ( specific details available from the listing in my shop:
This shows which pieces you will need to trim and what they should look like afterwards:
2) Next - the face - if you use gel pen make sure it is completely dry before going any further to avoid smudging.
3) Stick the White pearl legs over the top of the body.
4) Cut the white pearl hands and stick them over the top of the hands
5) Cut the purple pearl head shape as per my photo above -this is the trickiest part. You can always just put a bit across the top of his head if you find it hard.
6) Stick the purple card strips as I have done in the photo
7) Cut the white coat as per photo above and stick onto body hiding all the edges of the white legs and hands you stuck on.
8) Cut the lime coat as per the photo above and trim the sleeves. Stick on where I have done
9) Cut the badge shape from the blue card and stick on then using black pen draw on the design.
10) Cut the black triangle shape and stick on, also stick on the red circle punchie.
11) Before you stick the shoes on - stick the purple pair behind the white ones and then cut the lime ones up as per my photo and stick them on, then stick the shoes on
12) Stick on the vellum circle for the helmet
13) If you want - use liquid pearls for the other buttons - or you can use pens.
Voila! Your Buzz should now be finished - and look like this one below!